V17 Agitator Belt

Alternative Manufacturer

Alternative Manufacturer
V17 Agitator Belt

This agitator belt will ensure your vacuum delivers the pick up performance required. Learn more about vacuum belts below:

What does the vacuum belt do?
The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

Is a faulty belt causing the problem?
The following faults typically indicate a problem with the vacuum belt:

o The vacuum is on but it doesn't seem to pick up
o The vacuum has the smell of burnt rubber
o The vacuum cleaner has become harder to push
o The brush roll/agitator has stopped spinning
*Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.

When should you replace a vacuum belt?
Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.

What causes vacuum belts to fail?
A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.

How to replace a vacuum belt:
1:
Unplug the vacuum cleaner from the mains power supply. Then locate the plate or housing that retains the agitator brush.
2: Remove the plate or housing in order to gain access to the belt. There may be screws on some models. Discard the old belt.
3: Fit the replacement belt by stretching it from the brush roll to the motor drive shaft. You may need to use a screwdriver to stretch the belt across.
4: Check the brush bar turns freely with the new belt attached and then simply refit the housing.
*This is a general guide to replacing a faulty belt on an upright vacuum cleaner. The process may vary slightly depending on the model and brand of vacuum you own.

Help and tips from the appliance repair experts
1.
New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.

While you're replacing the belt, why not…
Replace the filters in the vacuum cleaner. These can easily become clogged and this can impede the airflow, which can cause the vacuum to lose suction and become less effective. It is also the ideal time to check you haven't lost any of the vacuum tools such as the crevice nozzle or upholstery tool.

Suitable for select models of Argos, Bush, Hoover and Moulinex vacuum cleaners.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

  • V17 belt
  • Pack of 2 belts
  • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts

Brands this fits:

Select your brand to check for model compatibility:

Hoover V17 Agitator Belt (Pack Of 2)

Genuine spare part

V17 belt Includes 2 x belts Please Note: On Dust Manager models this only fits early models without the pulley system. Retains the high performance...

more >

Multi-Buy Save 10% if you buy 2 or more - only £6.11

Pack of 2

£6.79

In stock - Next Day UK Delivery available

Vax Belt Kit (Type 10)

Genuine spare part

Type: 10 Pack of 2 belts The vacuum belt's primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets....

more >

Pack of 2

£9.94

In stock - Next Day UK Delivery available

Vax Belt Kit (Type 1) - Pack Of 2

Genuine spare part

Type: 1 Includes 2 x drive belts The Belt Kit Type 1 contains 2 drive belts that are suitable for use with upright vacuum cleaners. Vacuum belts need...

more >

Multi-Buy Save 10% if you buy 2 or more - only £8.95

Pack of 2

£9.94

In stock - Next Day UK Delivery available

Hoover U6 Carbon Filter Kit

Genuine consumable

Type: U6 1 x Two layer filter 2 x Exhaust filters This Hoover carbon filter kit is a genuine spare.

more >

Multi-Buy Save 10% if you buy 2 or more - only £14.27

£15.86

In stock - Next Day UK Delivery available

U6 Filter Set

Alternative Manufacturer

Type: U6 1x Two Layer Filter 2x Exhaust Filters A well maintained vacuum is sure to provide you better results, and replacing the filters on a regular...

more >

Multi-Buy Save 10% if you buy 2 or more - only £6.58

Set

£7.31

In stock - Next Day UK Delivery available

Hoover H20 Purepower High Filtration Dust Bags (Pack Of 5) & Pre Motor Filter

Genuine consumable

Type: H20 Includes 5 x Dust Bags Includes 1 x Pre Motor Filter 2 Layers of filtration Sealing system that ensures all dust is securely trapped in...

more >

Multi-Buy Save 10% if you buy 2 or more - only £10.58

Box of 5

£11.76

In stock - Next Day UK Delivery available

Hoover H20 High Filtration Dust Bags (Pack Of 5) & Pre Motor Filter

Genuine consumable

Type: H20 High Filtration Polybagged Includes 5x Dust Bags and pre motor filter Your vacuum cleaner features a removable H20 High Filtration Dust...

more >

Multi-Buy Save 10% if you buy 2 or more - only £8.00

Pack of 5

£8.89

In stock - Next Day UK Delivery available

H20 Dust Bag (Pack Of 5) - BAG155

Alternative Manufacturer

Type: H20 Material Type: Paper Includes 5x Dust Bags Cardboard Collar Loss of suction from your vacuum? Not picking up as much dirt when you vacuum...

more >

Multi-Buy Save 10% if you buy 2 or more - only £4.69

Pack of 5

£5.21

In stock - Next Day UK Delivery available

Universal 30 To 36mm Screw Fit Flexi Crevice Tool

Alternative Manufacturer

Fits externally to 30-36 mm Vacuum Hoses & Extension Tubes Detachable Brush Length:63 cm Perfect for cleaning behind cabinets and in between awkward...

more >

£10.46

In stock - Next Day UK Delivery available

Universal 30.5mm To 37mm Screw Fit Floor Tool

Alternative Manufacturer

Supplied with screw fit collar and pip fitting collar Adjustable hose fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not...

more >

£12.79

In stock - Next Day UK Delivery available

Universal 30 - 37mm Screw Fit Dustmaster Lint Tool

Alternative Manufacturer

Fits externally to 30-37 mm Vacuum Hoses & Extension Tubes Adapts to fit most vacuums Designed for maximum pick-up and fast removal of cat, dog and...

more >

£10.99

In stock - Next Day UK Delivery available

£2.50 Pack of 2
Multi-Buy:
Save 10% if you buy 2 or more - only £2.25

Stock No: 1897458PM

This agitator belt will ensure your vacuum delivers the pick up performance required. Learn more about vacuum belts below:

What does the vacuum belt do?
The vacuum belt is a key component of an upright vacuum cleaner. Its primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets. Vacuum belts are made of rubber and they are stretched between the motor pulley, which powers the belt, and the brush bar/agitator.

Is a faulty belt causing the problem?
The following faults typically indicate a problem with the vacuum belt:

o The vacuum is on but it doesn't seem to pick up
o The vacuum has the smell of burnt rubber
o The vacuum cleaner has become harder to push
o The brush roll/agitator has stopped spinning
*Remember that a snapped or loose vacuum belt is the most likely cause, but this may not be the only fault that can cause these issues to arise.

When should you replace a vacuum belt?
Vacuum belts need to be replaced as soon as they become damaged. They are designed to snap if the brush roll becomes blocked in order to protect the motor. To ensure that your vacuum cleaner maintains effective performance it is usually suggested that you replace the belt around every 4 - 6 months as they can easily become stretched. It is also recommended that you keep a spare vacuum belt in the cupboard, so you are prepared.

You can check for signs of a damaged belt by turning on the vacuum cleaner and laying it on its side. Simply look underneath the vacuum cleaner to identify if the brush bar is spinning. If the brush bar doesn't move then the belt needs to be replaced. Also when you remove a suspected worn belt it may have become mis-shaped or have visible signs of wear such as burn marks.

What causes vacuum belts to fail?
A key cause of vacuum belt failure is a blockage that stops the agitator brush bar from being able to rotate. This can be caused be numerous things, but hair and thread from the carpet becoming tangled around the brush bar is a common cause. In order to prevent future problems, you should take the time to cut away and remove any obstructions as part of your regular vacuum cleaner maintenance.

How to replace a vacuum belt:
1:
Unplug the vacuum cleaner from the mains power supply. Then locate the plate or housing that retains the agitator brush.
2: Remove the plate or housing in order to gain access to the belt. There may be screws on some models. Discard the old belt.
3: Fit the replacement belt by stretching it from the brush roll to the motor drive shaft. You may need to use a screwdriver to stretch the belt across.
4: Check the brush bar turns freely with the new belt attached and then simply refit the housing.
*This is a general guide to replacing a faulty belt on an upright vacuum cleaner. The process may vary slightly depending on the model and brand of vacuum you own.

Help and tips from the appliance repair experts
1.
New vacuum belts can be tight to fit. If you are struggling to fit the new belt, you may find that warming it slightly with a hairdryer may make it more pliable.
2. When your new belt arrives it may appear to be considerably shorter than the faulty one. Don't worry as the old one will just have become stretched during constant use.

While you're replacing the belt, why not…
Replace the filters in the vacuum cleaner. These can easily become clogged and this can impede the airflow, which can cause the vacuum to lose suction and become less effective. It is also the ideal time to check you haven't lost any of the vacuum tools such as the crevice nozzle or upholstery tool.

Suitable for select models of Argos, Bush, Hoover and Moulinex vacuum cleaners.

Please check the list of suitable models to ensure that this spare part will fit your appliance.

  • V17 belt
  • Pack of 2 belts
  • Manufacturers’ names and numbers are used for reference purposes only. These parts are in no way associated with the initial manufacturers parts

Brands this fits:

Select your brand to check for model compatibility:

Brands this fits:

Select your brand to check for model compatibility:

Hoover V17 Agitator Belt (Pack Of 2)

Genuine spare part

V17 belt Includes 2 x belts Please Note: On Dust Manager models this only fits early models without the pulley system. Retains the high performance...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £6.11
Pack of 2

£6.79

In stock Next Day UK Delivery available

Vax Belt Kit (Type 10)

Genuine spare part

Type: 10 Pack of 2 belts The vacuum belt's primary function is to turn the agitator brush bar, which is used to beat dirt and dust out of the carpets....

more >

Pack of 2

£9.94

In stock Next Day UK Delivery available

Vax Belt Kit (Type 1) - Pack Of 2

Genuine spare part

Type: 1 Includes 2 x drive belts The Belt Kit Type 1 contains 2 drive belts that are suitable for use with upright vacuum cleaners. Vacuum belts need...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £8.95
Pack of 2

£9.94

In stock Next Day UK Delivery available

Hoover U6 Carbon Filter Kit

Genuine consumable

Type: U6 1 x Two layer filter 2 x Exhaust filters This Hoover carbon filter kit is a genuine spare.

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £14.27

£15.86

In stock Next Day UK Delivery available

U6 Filter Set

Alternative Manufacturer

Type: U6 1x Two Layer Filter 2x Exhaust Filters A well maintained vacuum is sure to provide you better results, and replacing the filters on a regular...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £6.58
Set

£7.31

In stock Next Day UK Delivery available

Hoover H20 Purepower High Filtration Dust Bags (Pack Of 5) & Pre Motor Filter

Genuine consumable

Type: H20 Includes 5 x Dust Bags Includes 1 x Pre Motor Filter 2 Layers of filtration Sealing system that ensures all dust is securely trapped in...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £10.58
Box of 5

£11.76

In stock Next Day UK Delivery available

Hoover H20 High Filtration Dust Bags (Pack Of 5) & Pre Motor Filter

Genuine consumable

Type: H20 High Filtration Polybagged Includes 5x Dust Bags and pre motor filter Your vacuum cleaner features a removable H20 High Filtration Dust...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £8.00
Pack of 5

£8.89

In stock Next Day UK Delivery available

H20 Dust Bag (Pack Of 5) - BAG155

Alternative Manufacturer

Type: H20 Material Type: Paper Includes 5x Dust Bags Cardboard Collar Loss of suction from your vacuum? Not picking up as much dirt when you vacuum...

more >

Multi-Buy:
Save 10% if you buy 2 or more - only £4.69
Pack of 5

£5.21

In stock Next Day UK Delivery available

Universal 30 To 36mm Screw Fit Flexi Crevice Tool

Alternative Manufacturer

Fits externally to 30-36 mm Vacuum Hoses & Extension Tubes Detachable Brush Length:63 cm Perfect for cleaning behind cabinets and in between awkward...

more >

£10.46

In stock Next Day UK Delivery available

Universal 30.5mm To 37mm Screw Fit Floor Tool

Alternative Manufacturer

Supplied with screw fit collar and pip fitting collar Adjustable hose fitting (30.5 to 37mm*) suitable for almost every make of vacuum cleaner (not...

more >

£12.79

In stock Next Day UK Delivery available

Universal 30 - 37mm Screw Fit Dustmaster Lint Tool

Alternative Manufacturer

Fits externally to 30-37 mm Vacuum Hoses & Extension Tubes Adapts to fit most vacuums Designed for maximum pick-up and fast removal of cat, dog and...

more >

£10.99

In stock Next Day UK Delivery available

CloseClose Price Match Promise

At partmaster we won't be beaten on price and that's a promise. We are so confident that we offer our customers unbeatable value for money that if you find any of our products cheaper on another UK based website then we will refund you the difference.

How you can make a claim…

It's really very easy to use our Price Promise Guarantee, all you need to do is email us at pricematch@partmaster.co.uk with the following information:

  • * Your order number (highlighting the item you wish to price match)
  • * The competitors website address
  • * The competitors price including VAT and any delivery charges

Once we receive your email we will verify your claim to check that it meets the below Terms & Conditions and refund you the difference – simple.

The small print…

Our Price Promise Guarantee is valid for 7 days from the date of the order.

The product must be:…

  • * Identical in all aspects (i.e size, colour, spec quantity)
  • * In stock and available for next day delivery
  • * Inclusive of VAT and any delivery charges
  • * Exclusive of discounts, sales or offers
  • * Viewable and with the ability to be purchased online from the competitors website

The competitor's website must be:

  • * A UK based ecommerce site able to accept payment, this excludes auction and marketplace websites (eBay, Amazon, Play trade etc...)

Our Price Promise Guarantee can be changed or withdrawn at any time without prior notice. It is limited to one product per customer and can not be used with any other offer or promotion. Pricing errors will not be matched.

CloseClose

V17 Agitator Belt

£2.50
V17 Agitator Belt
  • V17 Agitator Belt
  • V17 Agitator Belt
 
 
CloseClose Partmaster

0344 800 3456

Contact Centre opening times

Monday - Friday 9am - 5.30pm

Saturday - SundayClosed

Alternatively, click here to contact us via email