Junker Dishwasher Hose
Narrow by Junker Dishwasher Model Number
Filter the results by model number to make sure you get the Junker part you need.
Choose your model numberDishwasher Hose: 1 - 12 of 32
Junker Universal 1.5m Drain Hose (Straight 21mm To Right Angle End 22mm Internal Dia.s
Alternative Manufacturer
1.5 Metre Hose Length Bore 21 mm 1 x 90º end If your drain hose has split or is no longer removing water from your appliance efficiently, use this... More information
£5.07
Junker Universal 1.5m Cold Fill Hose
Alternative Manufacturer
1.5 Metre Hose Length 1 x straight end 1 x 90º end Standard hose connections suitable for most machines Colour: Blue This 1.5 metre cold fill hose... More information
£3.45
Junker 2.2mtr. Drain Hose Straight (special)
Genuine spare part
Approximately 2.2m (not including connections at ends) If your dishwasher is not draining its water after a cycle, then there is likely to be a problem... More information
£12.50
Junker Drain Hose (Special)
Genuine spare part
without attachment The drain hose is used for removing the used water from your appliance. It is possible that over time the drain hose can become... More information
£11.32
Junker Upper Spray Arm With Inlet Pipe
Genuine spare part
The main purpose of the dishwasher spray arm is to provide high temperature water that shoots out at high pressure. A cracked or damaged spray arm... More information
£41.55
Junker Aquastop Fill Hose / Solenoid Valve With Lead Etc.
Alternative Manufacturer
230 volts 50 Hz Includes: Solenoid valve Help keep your dishwasher's water flowing efficiently without the risk of flooding using this Aquastop Fill... More information
£53.74
Junker Heat Pump Hose Clamp - 35mm
Genuine spare part
Diameter: Approx 35 (mm) This replacement Hose Clip Clamp Band sits on the water distributor inside your dishwasher and is ideal if you find... More information
£7.45
Junker Drain Hose Connection Set
Genuine spare part
Includes Hose & 2 Clips Dimensions: 25 X 19 X Length 61 mm Use this genuine Bosch Mounting Set to securely connect your dishwasher's Drain Hose to... More information
£13.83
Junker Aquastop Fill Inlet Hose With Solenoid - 1.68m
Genuine spare part
1.68m hose length "Aquastop" flood prevention system Uses electrical solenoid Female-to-female If your dishwasher's interior isn't consistently taking... More information
£110.27
Junker Wash Motor Seal : 65x29/34x21mm
Genuine spare part
Size: 65 x 29/34 x 21mm This genuine replacement gasket sits between the circulation pump head (inlet port) and the hose connecting to the pressure... More information
£26.03
Junker 2M Drain Hose (Special)
Genuine spare part
2m hose length The drain hose is used for removing the used water from your appliance. It is possible that over time the drain hose can become damaged... More information
£27.13
Junker Aquastop Solenoid Valve / Inlet Hose (For Flood Prevention) With Lead Etc.
Genuine spare part
Also Known As: Water Valve, Fill Valve, Inlet Valve, Electric Valve Solenoid flood prevention system Dual-layer hose If your dishwasher's interior... More information
£120.25